This tutorial explains how to calculate/estimate FPV range using the dB of your FPV equipment. Learning about this topics really help understand the capability and performance of FPV components, at least for me it was huge.

In FPV, we use the unit dB (decibels) to measure signal strength, on a logarithmic scale. Confused? Don’t worry, just know this, **increase dB by 3, the signal strength doubles.** (note: signal strength, not range)

And both antenna gain and VTX power can be expressed in dB too.

Why use dB you might ask. Well, for some applications, dB is much easier to work with, because the math is simpler. There are no multiplications, only adding numbers together.

FPV signal is attenuated as it travels through air – the dB of the signal decreases as you fly further. In simpler words, by knowing the total dB in your FPV system, and the signal loss for traveling in the air (free space path loss), we can estimate the range.

The total dB in the FPV system is called link budget, and can be determined by:

- Antenna gains
- Transmitter power
- Receiver sensitivity

The maximum range is when the dB drops to 0, or a certain minimum level. More link budget means more range. Every 6dB increase, doubles the range.

So yeah, we can estimate FPV range with dB, but it’s not saying we can work out exactly how many meters or feet our FPV system can achieve. The exact range can be affected by simply too many variables, such as background noise, interference, humidity etc.

But still, it’s a useful tool for working out how much improvement we can expect from using different components. like antennas of different gains, VTX of different powers, or receivers of different sensitivity etc.

You probably already know that FPV antennas have gains, which is measured in dBi (decibel isotropic). You can normally find out about antenna gain on the package or product page.

VTX (video transmitter) output power is usually described in mW (mill-watt), and you can easily convert between dBm and mW using these equations:

dBm = 10*log10(mW) mW = 10^(dBm/10)

Not good at maths? Don’t worry, there are a ton of online “mW to dB conversion calculators”. Even better, here is a look-up table listing all the common powers we use on mini quad VTX.

mW |
dBm |

1 | 0 |

10 | 10 |

25 | 13.98 |

50 | 16.99 |

100 | 20 |

200 | 23.01 |

300 | 24.77 |

400 | 26.02 |

500 | 26.99 |

600 | 27.78 |

800 | 29.03 |

1000 (1W) | 30 |

1500 (1.5W) | 31.76 |

2000 (2W) | 33.01 |

As you can see, every time VTX power is doubled, dBm increases by 3 (roughly). However, to double your range, you need 6dB increase remember? That’s 4 times the VTX power! And as power goes higher, the rate of increase in dB decreases, so it’s getting less and less effective for improving range.

Receiver sensitivity determines the minimum RF power the receiver can detect. The more sensitive it is, the more negative the number is. (Yes, it’s a negative number.)

Often this number is not publicly stated, and when it is, we have no idea how accurate it is as manufacturers are often too optimistic about it.

If you can’t find the number anywhere, 85dB is a good conservative guess for FPV video receivers (suggested by this post).

The RX5808 receiver module claims to have a typical sensitivity of -90dB according to Foxtech. I also asked FuriousFPV about the True-D’s sensitivity and they told me it’s -93dBm +/-5dbm.

If you know the sensitivity of your receiver, let me know in the comment.

Just plug these numbers into this calculator and it will return the range (distance) in kilometers.

Here is how it works in case you are interested.

The absolute maximum range is determined when the power of the signal drops to 0dB. But our videos normally start to show statics and becomes “unflyable” when signal gets weak. To ensure a reliable connection, we like to assume a minimum level we want to maintain – the Link Margin. For example, 10dB or 12dB. You can go even higher if you are conservative.

Using the Free Space Path Loss equation from this page, we can rearrange it which gives us:

Distance = 10^((FSPL-LM-32.44)-20*log10(f))/20)

Where

- FSPL (Free Space Path Loss) = TX Antenna Gain + RX Antenna Gain + TX Power + RX Sensitivity
- LM = Link Margin
- f = frequency in MHz (mega hertz)

Say, I have this setup here:

**25mW VTX**(14dBm)- VTX antenna: Lollipop V2 Antenna (2.5dBi)
- VRX: True-D (-93dBm)
- VRX antenna: Lollipop V2 Antenna (2.5dBi)
- Assuming a link margin of 10dB

Plug these numbers into our calculator, the range is **0.52Km**.

Now, if I want to double the range, what should I do? You need to add 6dB somehow right? So here are the options:

- Use a
**100mW VTX**(20dBm, 4 times the power) - Or, use a higher gain antenna on the receiver, it has to be 8.5dB gain or more. Only directional antennas have such high gain, such as the Menace Pico Patch (9.4dB)

Doing one of these things will theoretically double your range to over 1km. If you do both, it will quadruple your range to over **2km**!

If this is still not good enough, using lower frequency will give you even more range assuming other variables stay the same. For example, using 1.3GHz instead of 5.8GHz, will give you over **10Km!** Here is a beginner guide to using 1.3GHz for FPV.

Of course, this is all based on the assumption that we are flying in perfect conditions. In real life the range is most likely not going to be this good.

The following can cause signal loss and reduction in FPV range.

- Interference and noise in the environment, or from other pilots
- VTX power drops when it gets hot
- Antenna orientation (how TX antenna and RX antenna are aligned)
- At 45 degree = -3dB
- At 90 degree = -20dB
- Two linear antennas pointing at each other = -30dB

- Antenna Polarization
- Linear to Circular = -3dB
- RHCP to LHCP = -20dB

- Loss in Coax cable and adapters of SMA, MMCX, UFL (Usually not a lot, e.g. 0.1-0.3dB)
- Antenna radiation pattern – Omni antennas have weak signal directly above, and directional antennas are far less effective outside of its beam-width

* Signal loss figures are from this Source

So now you know, there are more than one way to increase your FPV range apart from VTX output power. Using the correct antennas are far more important, as well as good practice, like matching polarization, good orientation etc. And I hope you now have a basic understanding how different components can affect your FPV range.